Description
7/16in. Carbon steel host bar, with a flat top to prevent bar roll during aggressive cornering
Carbides are made of yg13 tungsten that provides the ultimate tensile strength for extreme durability and hardness to reduce chipping and increase longevity
The 90 degree angle of carbide into the pocket of our runners makes for very large cross sections compared to other designs
1in. Carbide segments allow for flex in ski without compromising carbide adhesion
Engineered and test fitted to precisely fit your ski for easy install
Chamfered ends to reduce catching when backing up and unloading
Extended studs to allow for ski skins
All necessary fastening nyloc nuts included
All carbides and wearbars are finished in black rust preventative
Many competitors use a design that is mounted very shallow in the host bar
Our diamond shaped carbides are set deeper into the host bar giving it more surface contact adhesion. This will make it less susceptible to side impact failure from rocks or gravel
RUNNER STYLE:Ripper Four75
Features 4in. of 75 degree tungsten carbide .
This carbide is less aggressive and has a longer wear period.
Hardwelded in the front and back of the carbide for extended durability.
Recommended for use with lightly studded tracks or no studs.
Carbides are made of yg13 tungsten that provides the ultimate tensile strength for extreme durability and hardness to reduce chipping and increase longevity
The 90 degree angle of carbide into the pocket of our runners makes for very large cross sections compared to other designs
1in. Carbide segments allow for flex in ski without compromising carbide adhesion
Engineered and test fitted to precisely fit your ski for easy install
Chamfered ends to reduce catching when backing up and unloading
Extended studs to allow for ski skins
All necessary fastening nyloc nuts included
All carbides and wearbars are finished in black rust preventative
Many competitors use a design that is mounted very shallow in the host bar
Our diamond shaped carbides are set deeper into the host bar giving it more surface contact adhesion. This will make it less susceptible to side impact failure from rocks or gravel
RUNNER STYLE:Ripper Four75
Features 4in. of 75 degree tungsten carbide .
This carbide is less aggressive and has a longer wear period.
Hardwelded in the front and back of the carbide for extended durability.
Recommended for use with lightly studded tracks or no studs.
| Year | Make | Model |
|---|---|---|
| 1991-1996 | Arctic Cat | Pantera |
| 1991-1994 | Arctic Cat | Prowler |
| 1991-1992 | Arctic Cat | Prowler Mountain Cat |
| 1992 | Arctic Cat | Cheetah Touring |
| 1992-1998 | Arctic Cat | Cougar |
| 1992 | Arctic Cat | Cougar 2-Up |
| 1992-1994 | Arctic Cat | EXT 580 Mountain Cat |
| 1992-1997 | Arctic Cat | Jag |
| 1992-1993 | Arctic Cat | Jag AFS LT 1 Speed |
| 1992-1993 | Arctic Cat | Jag AFS LT 2 Speed |
| 1992-1997 | Arctic Cat | Jag Deluxe |
| 1992-1993 | Arctic Cat | Panther |
| 1992-1996 | Arctic Cat | Panther Deluxe |
| 1993-1994 | Arctic Cat | Cheetah 440 |
| 1993-1997 | Arctic Cat | Cougar Mountain Cat |
| 1994 | Arctic Cat | Cheetah 340 |
| 1994 | Arctic Cat | Cheetah 550 |
| 1994-1996 | Arctic Cat | EXT 580 |
| 1994-1997 | Arctic Cat | Puma |
| 1994-1997 | Arctic Cat | Puma 2-Up |
| 1994-1997 | Arctic Cat | Puma Deluxe |
| 1995-1998 | Arctic Cat | Bearcat 440 |
| 1995-1996 | Arctic Cat | Bearcat 550 |
| 1995-1996 | Arctic Cat | Wildcat EFI |
| 1995-1996 | Arctic Cat | Wildcat Mountain Cat |
| 1995-1996 | Arctic Cat | ZR 580 |
| 1995-1996 | Arctic Cat | ZR 580 EFI |
| 1996-1997 | Arctic Cat | Bearcat Widetrack |
| 1996 | Arctic Cat | Cougar 2-Up |
| 1996 | Arctic Cat | Jag Liquid |
| 1996 | Arctic Cat | ZR 580 EFI ETT |
| 1997-1998 | Arctic Cat | EXT 580 EFI |
| 1998-2000 | Arctic Cat | Bearcat 340 |
| 1998 | Arctic Cat | Jag 340 |
| 1998-1999 | Arctic Cat | Jag 340 Deluxe |
| 1998-1999 | Arctic Cat | Jag 440 |
| 1998-1999 | Arctic Cat | Jag 440 Deluxe |
| 1998-1999 | Arctic Cat | Panther 340 |
